Next: , Previous: Inferiors and Programs, Up: Running

4.10 Debugging Programs with Multiple Threads

In some operating systems, such as HP-UX and Solaris, a single program may have more than one thread of execution. The precise semantics of threads differ from one operating system to another, but in general the threads of a single program are akin to multiple processes—except that they share one address space (that is, they can all examine and modify the same variables). On the other hand, each thread has its own registers and execution stack, and perhaps private memory.

gdb provides these facilities for debugging multi-thread programs:

Warning: These facilities are not yet available on every gdb configuration where the operating system supports threads. If your gdb does not support threads, these commands have no effect. For example, a system without thread support shows no output from ‘info threads’, and always rejects the thread command, like this:
     (gdb) info threads
     (gdb) thread 1
     Thread ID 1 not known.  Use the "info threads" command to
     see the IDs of currently known threads.

The gdb thread debugging facility allows you to observe all threads while your program runs—but whenever gdb takes control, one thread in particular is always the focus of debugging. This thread is called the current thread. Debugging commands show program information from the perspective of the current thread.

Whenever gdb detects a new thread in your program, it displays the target system's identification for the thread with a message in the form ‘[New systag]’. systag is a thread identifier whose form varies depending on the particular system. For example, on gnu/Linux, you might see

     [New Thread 0x41e02940 (LWP 25582)]

when gdb notices a new thread. In contrast, on an SGI system, the systag is simply something like ‘process 368’, with no further qualifier.

For debugging purposes, gdb associates its own thread number—always a single integer—with each thread in your program.

info threads [id...]
Display a summary of all threads currently in your program. Optional argument id... is one or more thread ids separated by spaces, and means to print information only about the specified thread or threads. gdb displays for each thread (in this order):
  1. the thread number assigned by gdb
  2. the target system's thread identifier (systag)
  3. the thread's name, if one is known. A thread can either be named by the user (see thread name, below), or, in some cases, by the program itself.
  4. the current stack frame summary for that thread

An asterisk ‘*’ to the left of the gdb thread number indicates the current thread.

For example,

     (gdb) info threads
       Id   Target Id         Frame
       3    process 35 thread 27  0x34e5 in sigpause ()
       2    process 35 thread 23  0x34e5 in sigpause ()
     * 1    process 35 thread 13  main (argc=1, argv=0x7ffffff8)
         at threadtest.c:68

On Solaris, you can display more information about user threads with a Solaris-specific command:

maint info sol-threads
Display info on Solaris user threads.
thread threadno
Make thread number threadno the current thread. The command argument threadno is the internal gdb thread number, as shown in the first field of the ‘info threads’ display. gdb responds by displaying the system identifier of the thread you selected, and its current stack frame summary:
          (gdb) thread 2
          [Switching to thread 2 (Thread 0xb7fdab70 (LWP 12747))]
          #0  some_function (ignore=0x0) at example.c:8
          8	    printf ("hello\n");

As with the ‘[New ...]’ message, the form of the text after ‘Switching to’ depends on your system's conventions for identifying threads.

The debugger convenience variable ‘$_thread’ contains the number of the current thread. You may find this useful in writing breakpoint conditional expressions, command scripts, and so forth. See See Convenience Variables, for general information on convenience variables.

thread apply [threadno | all] command
The thread apply command allows you to apply the named command to one or more threads. Specify the numbers of the threads that you want affected with the command argument threadno. It can be a single thread number, one of the numbers shown in the first field of the ‘info threads’ display; or it could be a range of thread numbers, as in 2-4. To apply a command to all threads, type thread apply all command.

thread name [name]
This command assigns a name to the current thread. If no argument is given, any existing user-specified name is removed. The thread name appears in the ‘info threads’ display.

On some systems, such as gnu/Linux, gdb is able to determine the name of the thread as given by the OS. On these systems, a name specified with ‘thread name’ will override the system-give name, and removing the user-specified name will cause gdb to once again display the system-specified name.

thread find [regexp]
Search for and display thread ids whose name or systag matches the supplied regular expression.

As well as being the complement to the ‘thread name’ command, this command also allows you to identify a thread by its target systag. For instance, on gnu/Linux, the target systag is the LWP id.

          (gdb) thread find 26688
          Thread 4 has target id 'Thread 0x41e02940 (LWP 26688)'
          (gdb) info thread 4
            Id   Target Id         Frame
            4    Thread 0x41e02940 (LWP 26688) 0x00000031ca6cd372 in select ()

set print thread-events
set print thread-events on
set print thread-events off
The set print thread-events command allows you to enable or disable printing of messages when gdb notices that new threads have started or that threads have exited. By default, these messages will be printed if detection of these events is supported by the target. Note that these messages cannot be disabled on all targets.

show print thread-events
Show whether messages will be printed when gdb detects that threads have started and exited.

See Stopping and Starting Multi-thread Programs, for more information about how gdb behaves when you stop and start programs with multiple threads.

See Setting Watchpoints, for information about watchpoints in programs with multiple threads.

set libthread-db-search-path [path]
If this variable is set, path is a colon-separated list of directories gdb will use to search for libthread_db. If you omit path, ‘libthread-db-search-path’ will be reset to its default value ($sdir:$pdir on gnu/Linux and Solaris systems). Internally, the default value comes from the LIBTHREAD_DB_SEARCH_PATH macro.

On gnu/Linux and Solaris systems, gdb uses a “helper” libthread_db library to obtain information about threads in the inferior process. gdb will use ‘libthread-db-search-path’ to find libthread_db. gdb also consults first if inferior specific thread debugging library loading is enabled by ‘set auto-load libthread-db’ (see file).

A special entry ‘$sdir’ for ‘libthread-db-search-path’ refers to the default system directories that are normally searched for loading shared libraries. The ‘$sdir’ entry is the only kind not needing to be enabled by ‘set auto-load libthread-db’ (see file).

A special entry ‘$pdir’ for ‘libthread-db-search-path’ refers to the directory from which libpthread was loaded in the inferior process.

For any libthread_db library gdb finds in above directories, gdb attempts to initialize it with the current inferior process. If this initialization fails (which could happen because of a version mismatch between libthread_db and libpthread), gdb will unload libthread_db, and continue with the next directory. If none of libthread_db libraries initialize successfully, gdb will issue a warning and thread debugging will be disabled.

Setting libthread-db-search-path is currently implemented only on some platforms.

show libthread-db-search-path
Display current libthread_db search path.

set debug libthread-db
show debug libthread-db
Turns on or off display of libthread_db-related events. Use 1 to enable, 0 to disable.